Color Chart
This standard color chart maybe used to select the desired color for Kynar 500 2-step or Kynar XL (3-step). Baked Enamel or Baked Epoxy. For Powder Coat finish please refer to separate color chart.
This standard color chart maybe used to select the desired color for Kynar 500 2-step or Kynar XL (3-step). Baked Enamel or Baked Epoxy. For Powder Coat finish please refer to separate color chart.
Warranty
Kynar 500 standard warranty is five years. Twenty years warranty is available upon request at additional minimal cost. Baked Enamel standard warranty is one year. Baked Epoxy and Anodized Finish standard warranty is two years.
Kynar 500 standard warranty is five years. Twenty years warranty is available upon request at additional minimal cost. Baked Enamel standard warranty is one year. Baked Epoxy and Anodized Finish standard warranty is two years.
Anodized Finish
The appearance of an anodized finish may differ due to the type of metal such as alloy, temper, gloss, and surface. Anodized colors will vary from one batch to the other.
The appearance of an anodized finish may differ due to the type of metal such as alloy, temper, gloss, and surface. Anodized colors will vary from one batch to the other.
![]() D11 |
![]() D14 |
![]() D12 |
![]() D10 |
![]() D13 |
![]() D15 |
![]() D20 |
![]() D18 |
![]() D16 |
![]() D17 |
![]() D17 |
![]() D22 |
![]() D32 |
![]() D33 |
![]() D27 |
![]() D28 |
![]() D29 |
![]() D31 |
![]() D23 |
![]() D23F |
![]() D30 |
![]() D34 |
![]() D21 |
Anodized Finishes
![]() D310 |
![]() D311 |
![]() D312 |
![]() D313 |
![]() D315 |
Color samples shown above are as close as possible to the actual paint/anodize color, however, computer screen colors have their limitations. Each individual's screen may display the color differently. Samples of actual finishes are available upon request. Safe Air/Dowco reserves the right to change/alter this color chart without prior notice.
Prime Coat
Many jobs require that the product is field painted. Dowco offers an alkyd prime coat for any product surface where field painting is required. To help prevent paint failure, it is recommended that the field topcoat be applied within 30 DAYS of application after the product has been thoroughly field cleaned.
Acrylic Enamel
Long-lasting Acrylic Enamel is a cost effective finish that is resistant to weathering and corrosion making it a superior coating for commercial and industrial applications.
Kynar 500
Kynar 500 Fluoropolymer coating is one of the leading architectural coatings for aluminum products providing long life color retention, good adhesion and strong resistance to chalking, fading, or chemical abrasion. 5 year warranties are available upon request. The warranty does not apply to galvanized products.
Powder Coating
Powder coating is an environmentally friendly coating which is free or nearly free of VOC's. It is offered in an array of standard colors and textures or can be custom color matched it meet your design needs. When choosing powder you can count on a tough, durable, attractive finish with excellent scratch resistance giving you years of protection and beauty.
Many jobs require that the product is field painted. Dowco offers an alkyd prime coat for any product surface where field painting is required. To help prevent paint failure, it is recommended that the field topcoat be applied within 30 DAYS of application after the product has been thoroughly field cleaned.
Acrylic Enamel
Long-lasting Acrylic Enamel is a cost effective finish that is resistant to weathering and corrosion making it a superior coating for commercial and industrial applications.
Kynar 500
Kynar 500 Fluoropolymer coating is one of the leading architectural coatings for aluminum products providing long life color retention, good adhesion and strong resistance to chalking, fading, or chemical abrasion. 5 year warranties are available upon request. The warranty does not apply to galvanized products.
Powder Coating
Powder coating is an environmentally friendly coating which is free or nearly free of VOC's. It is offered in an array of standard colors and textures or can be custom color matched it meet your design needs. When choosing powder you can count on a tough, durable, attractive finish with excellent scratch resistance giving you years of protection and beauty.
Color Anodize
Color anodize becomes an integral part of the surface when the color finish is applied electrochemically on chemically clean aluminum to a minimum surface depth of 0.7 mil. Color anodize is specified by Aluminum Association Number AA-C22A44 Shade variation may occur between batches and when applied to various alloys.
Clear Anodize
Clear anodize is a pre-oxidizing process applied to an aluminum surface to provide a uniform finish not easily affected bv natural oxidizing. Conditions affecting the natural oxidizing are smog, chemical fumes. weather, etc.
204-RI is a 30 minute treatment providing a 0.4 mil minimum clear coating, It is identified by Aluminum Association Code Number AA-C22A31.
215-Rl is a 60 minute treatment providing a 0.7 mil minimum clear coating. It is identified by AluminumAssociation Code Number AA-C22A41.
The color chart shown may be used when selecting Kynar 500@ and Enamel finishes.
Color anodize becomes an integral part of the surface when the color finish is applied electrochemically on chemically clean aluminum to a minimum surface depth of 0.7 mil. Color anodize is specified by Aluminum Association Number AA-C22A44 Shade variation may occur between batches and when applied to various alloys.
Clear Anodize
Clear anodize is a pre-oxidizing process applied to an aluminum surface to provide a uniform finish not easily affected bv natural oxidizing. Conditions affecting the natural oxidizing are smog, chemical fumes. weather, etc.
204-RI is a 30 minute treatment providing a 0.4 mil minimum clear coating, It is identified by Aluminum Association Code Number AA-C22A31.
215-Rl is a 60 minute treatment providing a 0.7 mil minimum clear coating. It is identified by AluminumAssociation Code Number AA-C22A41.
The color chart shown may be used when selecting Kynar 500@ and Enamel finishes.